The DNP3 protocol has significant features that make it more robust and efficient. The event-oriented data reporting is one of these advantages, decreasing the network load and providing buffers. This…
The DNP3 protocol has significant features that make it more robust and efficient. The event-oriented data reporting is one of these advantages, decreasing the network load and providing buffers. This…
straton is a polyvalent automation and data processing environment for embedded platforms, compliant with the IEC61131-3 standard. The straton software consists of development tools, an integrated Editor and a Runtime…
MQTT is an open (OASIS and ISO) standard (ISO/IEC 20922) lightweight, publish-subscribe network protocol that transports messages between devices. The protocol usually runs over TCP/IP; however, any network protocol that…
straton offers a range of features regarding the OPC UA Server implementation. The aim of this implementation is to provide an easy way to exchange data through OPC UA protocol.…
STRATON AUTOMATION is a member of the EtherCAT group. As such the straton solution offers a range of different possibilities to support the integration of the EtherCAT protocols and supported…
The CAN protocol is an international standard. Based on this standard several protocols are available on the market, some are standardized like CANopen and other are proprietary. The CANopen Master…
It is possible to embed additional protocols or any configuration, through a graphic or tree view configuration, to the straton Editor and straton Runtime. To do so, two main components…
Simple Network Management Protocol (SNMP) is an Internet Standard protocol for collecting and organizing information about managed devices on IP networks and for modifying that information to change device behavior.…
straton offers the possiblity to configure and use a Dataserver. Its aim is to provide an easy way to exchange data with the platform holding the straton runtime without installing…
The straton software Validation Tool is designed for OEMs wanting to automate the validation of straton instruction sets, create test applications and automate regression testing in order to identify changes…
STRATON AUTOMATION provides a configuration tool for the Substation Configuration Language (SCL) defined by the IEC61850-6 standard. The SCL editor is integrated in the straton Integrated Development Environment (IDE) or…
The straton Editor enables to automate the creation of your IEC61131-3 projects. Many powerful applications are possible by writing automation scripts: - Create new wizards to build the skeleton of…
The straton IEC 61131 standard Soft PLC supports the Profinet standard for real time communications over Ethernet hardware. An advantage of Profinet is that it uses standard CAT5 cables and…
The VMTK (Virutal Machine Tool Kit) allows personalized integration of the straton Runtime into any software platform, independently from the hardware configuration and the operating system. It is the STRATON…
Because many different communication protocols are being used in substation automation, protocol converters are commonplace. Equipment vendors are facing significant challenges interfacing communications, leading to higher development costs for hardware…
Because many different communication protocols are being used in substation automation, protocol converters are commonplace. Equipment vendors are facing significant challenges interfacing communications, leading to higher development costs for hardware…
The IEC 60870 is an international standard for system monitoring and telecontrol in utilities for water, gas and electricity distribution and energy power system. The straton IEC 870 stack supports…
The IEC 60870 is an international standard for system monitoring and telecontrol in utilities for water, gas and electricity distribution and energy power system. The straton IEC 870 stack supports…
The IEC 61131-3 is the third part of the IEC61131 standard published by the International Electro technical Commission (IEC) in 1993. The IEC61131 is a worldwide standard applicable for the…
EtherNet/IP (Ethernet Industrial Protocol) is an open communications protocol for communication between industrial control systems and their components. The application layer of this protocol is based on the Common Industrial…
The world of the embedded platforms evolves, the configuration of platforms owes to be intuitive. Buttons and digital display disappear to leave enough place for graphical screens. With the goal…
This document describes the controls/widgets integration in a new framework. This enables the straton OEMs to integrate easily straton IEC61131-3 editors in their existing or new framework. [minti_button link="https://straton-plc.com/document/datasheets/06.straton_datasheet_controls_widgets.pdf" size="full"…
STRATON AUTOMATION provides an integrated configuration tool for the CompactCom based on the Driver Development Kit. The result is a transparent integration of this additional Fieldbus in the straton IEC…
The Code Checker runs automatic reading and checking of the project programs. It checks many rules about: - Declared objects (naming, comments, use…) - Use of potentially unsafe features -…
End users are waiting from their suppliers a complete development suite including the main components link to the hardware platform (RTU, Drives, Motion controllers….) and the programming language of the…
Multitask implementation is supported in editor version 8.7 or later. Multitask implementation does not include a scheduler, but it is based on the low layer of the system. For this…