The Runtime to run your application developed with the straton Editor.
It embeds most of the protocols supported by straton (MODBUS, CAN, IEC61850, IEC60870, DNP3, Profinet, OPC UA, MQTT…).
Full version. Application limited to 2 hours of use if no license is used.
The straton IEC61131-3 software covers all areas of industry and automation control, from embedded solutions to soft PLCs. It is mainly dedicated to Original Equipment Manufacturers (OEM), as well as hardware and software manufacturers.
Content: Evaluation runtime compiled for ARM processors and tested on Raspberry Pi2, Pi3 and Pi4 with Raspberry Pi OS (formerly Raspbian). This is an evaluation runtime! It must be used for testing purposes only. By clicking on the ‘Download’ button below, you also agree to not use it for commercial purposes.
To facilitate the download of the runtime, you should enter the following prompt directly into the bash of Raspberry PI:
At first, you need to download the runtime:
# wget https://support.straton-plc.com/_raspberryPI/runtime/t5pi_energy Make it executable:
# chmod +x t5pi_energy Finally, you just have to start it:
# sudo ./t5pi_energy If you want to use the 64 bits version of the runtime, replace ‘t5pi_energy’ by ‘t5pi64_energy’
You can also download all the files useful for this runtime with the button below:
Download userguide
Comments are closed.